Linear Intelligent AC Power Source APA2000 Series

Product parameter

• Input voltage range:Single phase 195~245V
Three phase 340V~420V
• Input frequency range:50/60Hz±5%
• Output voltage range:Single phase 0~300V (0~600V Match)
Three phase 0~520V (0~1040V Match)
• Output frequency range:45~500Hz
• Waveform Distortion≤0.3% Load Regulation≤0.5% Frequency stability≤0.01%
• Three-phase phase angle can be adjusted (0~120 degrees),each phase in use can independently
adjust voltage and frequency, and independently display voltage and frequency linear climb and drop editing test function, can do voltage and frequency gradient and interrupt test, and has independent compensation function of impedance, can simulate various test and test power supply of power grid.

High Performance
• Low Distortion Interference, Complete Input/Output Isolation
• The maximum single-phase capacity can reach 15KVA and the three-phase power supply can reach 45KVA.
• Remote voltage feedback function to ensure the consistency of test point voltage value and setting value
• Voltage and current measurements are based on high precision ADC AC sampling and digital real value calculation.
• A single chip computer (D/A circuit) is used to collect voltage and current waveform data directly.
• contains RS232 or RS485 interface, communicate with computer. Five groups of test groups can be set up on a single machine. Each group can set up 35 different test points (different voltage0~300V, frequency45~500Hz, time 0.1S~999.9H and can do (0~999999) cycle test.
• Built-in soft start device can easily start motor, compressor and other high starting current load
• The central processing unit is used to control the opening and closing of logic circuits.
• In-machine temperature and humidity detection, intelligent exhaust dehumidification, ensure the normal use of power supply

Humanized design
• Ultra-large 7-inch touch screen displays parameters: voltage, frequency, power, power factor, current, peak current, temperature, electric quantity, time, phase angle, impedance value and real-time curve of voltage and current.
• Power supply multi-point real-time sensor monitoring, running normal code and fault code screen display, fully control the power supply status.
• The parameter calibration is accomplished by open software, and different from other power sources, the potentiometer and adjustable resistance are also adjusted in the circuit.
• Wide range of voltage and frequency regulation, digital key input, independent display of three-phase voltage and line voltage
• Digital password lock, test data security and prevent important test data from being modified by misoperation

APA2000L Single phase series

Model	2000L	2001L	2002L	2003L	2005L	2010L	2015L
Output Capacity	500VA	1KVA	2KVA	3KVA	5KVA	10KVA	15KVA
Input Power	1Ø2W+G 110V/220V±10% 50/60Hz±5%
Output Frequency	50Hz/ 60Hz/ 45~500Hz
Frequency stability	0.01%
Output Voltage	0~150V/0~300V(AUTO)
Output current	4.2/2.1	8.4/4.2	16.8/8.4	25/12.5	42/21	84/42	126/63
Load Regulation	≤0.5%
Waveform Distortion	≤0.3%
Meter Display	Touch screen display Voltage, frequency, power, power factor, current, peak current, temperature, electric quantity, time, phase angle,Impedance value and Real-time Curve of Voltage and Current
Protective Device	Overload, Overcurrent, Temperature, Short Circuit, Undervoltage Protection and Alarm
Working condition	ambient temperature 0~40°C relative humidity10~90%

APA2000LS Three phase series

Model	2006LS	2010LS	2015LS	2020LS	2030LS	2045LS
Output Capacity	6KVA	10KVA	15KVA	20KVA	30KVA	45KVA
Input Power	1Ø2W+G 220V±10%			3Ø4W+G 220V/380V±10% 50/60Hz±5%
Output Frequency	50Hz/ 60Hz/ 45~500Hz
Frequency stability	0.01%
Output Voltage	0~150V/0~300V(AUTO)
Output current	16.8/8.4	27.5/13.75	42/21	55.6/27.8	84/42	126/63
Load Regulation	≤0.5%
Waveform Distortion	≤0.3%
Meter Display	Touch screen display Voltage, frequency, power, power factor, current, peak current, temperature, electric quantity, time, phase angle,Impedance value and Real-time Curve of Voltage and Current
Protective Device	Protection and alarm of short circuit, short voltage and short phase with overload, over current and over temperatur
Working condition	ambient temperature 0~40°C relative humidity10~90%

TAG: iec tester, laboratory test equipment,iec testing equipment

Kingpo Technology Development Limited is a pioneer and leader of global safety testing equipment manufacturer.We offer one-stop service for worldwide labs from R&D,testing,production to after-sales service.We dedicate ourselves in achieving optimal production quality for our customers,reduce cost and enhance enterprise’s international competitiveness.

Kingpo is accredited by International Electrotechnical Commission(IEC) and becomes a nominated supplier and is officially issued a CBTL certificate.We are now among the world’s leading laboratory testing equipment manufacturer to produce the highest level and more standard testing equipment for global Electrotechnics labs becoming nominated supplier of NEMKO,UL,PHILIPS,CTK,CVC(Vkan Certification & Testing Co.,Ltd),Dongguan Quality Testing,China Household Electric Appliance Research Institute,Russia National Standard Institute,Belarus National Standard Institute,Korea National Standard Institute,etc.Lamp cap gauges and testing equipments produced by Kingpo,which are calibrated by CNAS and ilac-MRA ,have a high international reputation.

Kingpo aims at manufacturing world class testing equipment for Chinese labs,establishing an independent R&D center and introducing foreign state-of-the-art technology and international high-tech talents.Adopting a creative design concept,taking sensor data acquisition as forerunner,computer control technology as lead,imported transmission device with high accuracy and low noises,we have developed more than one hundred and sixty products.

Lab software Lims system　

Material combustibility testing equipment　

ELectric tool testing equipment

Plug and socket testing equipment

Switch service life testing equipment　　　

Electrical accessories testing equipment

Luminaire testing equipment　　

Household appliances testing equipment　　　

Anti water spray testing equipment

Wire and cable testing equipment

IT product testing equipment　　　　

Battery testing equipment

Kingpo’s domestic customers include Entry-Exit Inspection and Quarantine Bureau, Bureau of Technical Supervision,Product Quality Supervision and Inspection Institute,UL Lab(Underwriter Laboratories),TUV Rheinland,SGS and other electronic manufacturer.Our products are exported to international market and have also established distributorships in HK,Vietnam,Singapore,Thailand,Iran,India,

Africa,New Zealand,Australia ,Germany and so on.

Service is an essential factor to improve enterprise’s competitiveness.Therefore,Kingpo has always made every effort in improve service level and service value.Before sale,we have professional engineering team to provide customers with comprehensive consultant and customized service.After sale,we have after-sale team to offer customer timely and satisfying technical support and product maintenance.

By means of excellent product competitiveness and complete service,our company has won numerous customers high praise and sincere trust.In complying with technical improvement and increased efficiency and quality assurance of these products ,we insist on providing high end products to market and dedicating to being a leader in testing equipment industry.